We pre-inspect and colorfast-test your upholstery, then clean with pH-balanced solutions and the proper method (low-moisture or hot-water extraction) to lift body oils, spills, and everyday soil without harming fibers, seams, or trims.
Targeted application and thorough extraction help fabrics dry quickly. Cushions are handled carefully and reset neatly so couches, sofas, and recliners are ready for use sooner.
We spot-treat common upholstery issues—food and drink spills, pet spots, and lingering odors—with fabric-appropriate solutions, leaving your seating cleaner, fresher, and comfortable again.
A precise, fiber-safe workflow for carpeted rooms, area rugs, and upholstered furniture—balancing chemistry, agitation, time, and temperature.
We identify fiber and fabric types—nylon, polyester, olefin, wool, cotton, linen, rayon/viscose, microfiber—and assess construction and condition. An inconspicuous pre-test confirms colorfastness and chemistry compatibility so dyes remain stable.
Traffic lanes, filtration lines, arm/headrest soils, and pet areas are mapped to set the safest plan. Findings drive detergent selection, dwell time, and the gentle agitation tools used next.
We move light items, block/foil furniture feet, pad corners, and protect wood trim. A fiber-appropriate pre-spray is applied to bonded soils; for synthetics we may add a tested oxygen booster, while delicate textiles get low-alkaline or wool-approved formulas.
Dwell time lets detergents break soil bonds so extraction needs less force. Crevices and seams on furniture are carefully pre-vacuumed to reduce re-soiling.
Carpets are hot-water extracted with calibrated heat/flow while injecting an acidic rinse to neutralize residues and leave fibers soft. Upholstery is cleaned with a low-moisture hand tool to control penetration and protect cushions and linings.
After the rinse/extraction, we set air movers to accelerate dry times. Protector (if selected) and final grooming follow in Step 4 before a final walkthrough with you.
We distribute chemistry with a counter-rotating brush or soft pad on carpet; on fabrics we use hand tools, microfiber pads, or horsehair brushes to lift soils without over-wetting. Specialty spotters—protein/tannin, solvent gel for oils, or rust remover—are used only where needed and then neutralized.
If you choose Scotchgard™, we apply it now—immediately after the rinse (Step 3)—so it bonds to clean carpet fibers and upholstery for better resistance to dry soil and common spills. We then groom the pile/nap as needed.
Breaks down body oils and food soils so they release during extraction. Applied in Step 2 with proper dwell time on carpets and durable upholstery (after testing) to reduce agitation and protect fibers.
Adds gentle oxidative power for organic discoloration on synthetics. Used selectively in Step 2 (pre‑spray) or Step 4 (targeted spotting) on colorfast carpet and some fabrics after pre-testing; avoided on unstable dyes and sensitive natural fibers.
Neutralizes alkalinity, suspends residues, and leaves carpet and many textiles soft. Delivered through the extractor or hand tool in Step 3 for a residue-free finish.
Targets oils, cosmetics, tar, and adhesive transfer without flooding backing or cushions. Used sparingly in Step 4 and neutralized before rinse if pre-applied.
pH-specific formulas for beverages, foods, and protein residues. Applied only to affected areas in Step 4, then rinsed or re-acidified as needed for carpet and upholstery.
Reductive spotter for rust/metal transfer. Carefully controlled contact in Step 4 followed by a thorough flush to protect dyes and nearby wood trim.
Keeps foam from prior residues under control so the extractor or hand tool maintains vacuum. Used in the waste tank during Step 3.
Applied immediately after the rinse (Step 3) for the best bond to clean carpet fibers and upholstery. Discussed during booking or inspection so we can prepare coverage for the areas you care about most.
Some of Our Business Clients :
Assess Cushions & Seams
Edge & Crease Detail
Balanced Application
Final Walkthrough
Refresh the furniture you use every day. Our fabric-safe process lifts body oils, pet dander, and everyday soil from sofas, sectionals, loveseats, recliners, and ottomans. We test fibers first and match the method—hot-water extraction or low-moisture—to protect color and texture while leaving a clean, residue-free finish.
We specialize in upholstery—deep cleaning for couches, sofas, recliners, and more. Expect careful inspection, fabric-safe solutions, quick dry times, and results you can see. (No dryer vent service.)
IICRC-certified technicians. The right method for your material—steam / hot-water extraction for most fabrics or dry / solvent cleaning for delicate textiles and leather. Pretreatment, spot work, and fabric protection are included with cleaning.
Targeted cleaning around headrests, arms, and footrests where body oils and soil build up. We test your fabric, choose steam or dry cleaning as appropriate, and finish with a protective treatment so it stays cleaner, longer.
Deep clean body-contact areas and cushion seams to lift oils and everyday soils. Steam cleans most fabrics; dry/solvent is used on sensitive or leather pieces. Fresh, even results without overwetting or dye risk.
Same meticulous process, optimized for high-traffic family couches. We pretreat, lift residues, and groom textiles for a uniform, ready-to-use finish in hours.
Minimum per visit: $150 residential / $150 commercial. Over-sized items may cost more.
Prices shown reflect our current public rate guide; confirm final totals when booking. Protector is included with cleaning.
Family Room Seating Care
Gentle, Low-Moisture Clean
Recliner Deep Clean
Leather Recliner Care
All solutions are used as directed and are child/pet-friendly. Deodorizing and protector are available on request.
Yes. We follow the furniture’s cleaning code and colorfast test first. W/WS fabrics allow carefully controlled water-based cleaning; S-coded fabrics get low-moisture or approved solvents; X-coded items are vacuum-only. We tailor chemistry, moisture, and heat to protect seams, cushions, and trims.
We treat common issues—food/drink spills, body oils, and many pet accidents—with fabric-appropriate spotters and deodorizers. Some stains (dyes, inks, set-in tannins) and long-term odor sources may not reach 100% removal, but most seating looks and smells dramatically fresher after service.
Cleaning improves appearance but can’t reverse physical wear. UV fading, fabric pilling, seam stress, or compressed foam are structural/age-related issues. We’ll point out anything beyond cleaning so you can plan repairs or replacements as needed.
Most pieces clean in 45–90 minutes depending on size, soil, and fabric. Typical dry time is 2–6 hours with airflow. You can speed drying by running ceiling fans and opening windows when weather allows. Please avoid sitting until cushions are fully dry.
Please clear small items and toys, and secure pets. We lift/reset loose cushions and clean accessible areas of stationary sofas and standard recliners. We don’t service motorized/mechanical parts or move oversized/fragile pieces (pianos, aquariums, built-ins). We’ll work carefully around what remains.
Every 12–24 months for most homes. With kids, pets, or high use, a 6–12 month cadence keeps seating fresh and extends fabric life. Vacuuming and quick spill response make a big difference between visits.
Vacuum weekly with an upholstery tool, rotate cushions, and blot spills immediately—don’t rub. Use a fabric-safe cleaner that matches your code (W/S/WS) and always spot-test.
Avoid: bleach, high-alkaline degreasers, steam on S-coded fabrics, and heavy perfume sprays that mask odors without removing soils.
Yes—an optional protector helps repel dry soil and spills. It cures as the piece dries and doesn’t change the look or hand when applied correctly. It’s not a “plastic coating,” just an invisible barrier that makes maintenance easier.
